Glass wool board is widely used in various buildings as an efficient sound insulation and thermal insulation material. Especially in the sound insulation and thermal insulation of the roof, the glass wool board plays an important role, which can effectively reduce energy consumption and reduce the frequency of use of air conditioning or heating. Utsen glass wool manufacturers will introduce how to lay the glass wool board of the roof correctly.

1. Prepare

Before the laying of the roof glass wool board, the following preparations need to be made:

(1) Clean the base: ensure that the roof base is clean, dry and free of sharp objects or dust.

(2) Measurement size: Measure the size of the roof according to the requirements of the design drawings, and determine the number and size of the glass wool board that needs to be laid.

2. Install glass wool board

According to the requirements of the design drawings, determine the laying position and direction of the glass wool board. When installing, you need to pay attention to the following points:

(1) The use of brackets or fixtures: the use of special fixtures or brackets to fix the glass wool board can ensure that the position and height of each glass wool board are correct.

(2) Staggered cross-laying: When laying glass wool board, "cross" and "staggered" should be used to ensure uniform coverage of the entire roof and reduce the generation of thermal Bridges.

3, sealing treatment

After the glass wool board is laid, it is necessary to seal the joint. This can prevent air penetration and heat loss, increase the insulation effect.

4. Protective measures

After installation, it is necessary to protect the glass wool board to avoid erosion by the external environment. In the protection, you can use a special protective cover or covering film to ensure that the glass wool board is not contaminated and damaged.